TP-Link Router is a brand used by millions of people around the world. It is very important to log in to the interface of this modem and adjust the internet connection settings. You can find all the details on how to login to TP-Link Router, how to reset the user and password.
How to Login TP-Link Router?
- Connect the TP-Link router you have purchased to your devices such as computer, tablet or phone via Wi-Fi or ethernet cable.
- Then press enter by typing 192.168.1.1, 192.168.0.1 or tplinkwifi.net to connect to the interface of your TP-Link modem. To find out which of these addresses is correct, check the label on the back of the modem, where you can find the IP address.
- You will be asked to enter a username and password. These passwords are usually admin/admin or admin/password. Check other passwords at Default Router Password List
However, with some updates this password may have changed. If the login information is incorrect, the modem may have changed its password before.
In this case: press and hold the ‘reset‘ button on the back of the modem for 10 seconds and reset to factory settings. Then try the above steps again.
TP-Link Router Forgot Password
Sometimes we may forget our router or modem password. If you have not used a password manager, it is very difficult to remember it. In such cases, the solution formulas are as follows:
1. Try the modem’s default passwords. Examine the label on the back of your modem. The label may have some information for you.
2 .Reset the cache and cookie settings of your web browser. Previously logged in and subsequently changed passwords remain stored, which can confuse browsers. One of the clearest solutions for this is to clear cookies and cache.
3.Reset the modem to factory settings. Resetting the router to the factory settings is a valid method. You can do this by holding down the ‘reset‘ button on the back for 10 or 15 seconds.
Note: After resetting your modem, you can delete the special modem username and interface password that your ISP allocated for you. You may have to call or text to get this password. Make sure you have this information before resetting your modem.
What Settings Can I Make on the TP-Link Router Interface?
✅Change your WiFi username and password. You can successfully update your WiFi settings and change your password in the SSID settings section.
✅Check your connected devices in the DHCP clients list and block the ones you don’t want.
✅Adjust port forwarding and DMZ settings. Configure port forwarding settings for remote access and online gaming.
✅Perform modem reset and firmware update with remote management.
✅Protect your settings forever with backup.
✅Manage NAT and MAC settings.
Can’t access login page of TP-Link router
If you cannot reach 192.168.1.1 or tplinkwifi.net, the following steps may be the solution for you:
- Check if the IP address is correct. You can find your Router Ip address using cmd or Terminal. If you cannot find it, check Find Router Ip Address.
- Try changing your web browser. For example, use Google Chrome instead of Firefox.
- Unplug the modem and wait 5 minutes, then plug it back in and reboot.
By logging into the Tp-Link Router interface: you can control all your internet connections. You can surf safely by managing security settings. Tp-Link Router uses the addresses 192.168.1.1, 192.168.0.1 and tplinkwifi.net. These addresses allow you to access the modem interface. After accessing the modem interface, you can change many simple and useful features such as device management, security settings, password and username change. You can solve any problems by reading and commenting on our article.