Piso Wifi Pause Time is a pay-as-you-go internet service that is widely used in the Philippine government. Users purchase the Wi-Fi service for a fee and use the internet service for a set period of time. Piso Wifi is a useful feature that allows users to pause time so that they do not eat up their internet time.
10.0.0.1 Piso Wifi Pause Time
Piso Wifi Pause Time allows users to temporarily pause their internet time. For example; If a 30-minute purchase has been made and a 10-minute break is desired, 20 minutes can be stopped thanks to the Pause Time feature. Thus, when you come back, you will start from your 20 minutes.
-
- Piso Wifi Pause Time is an affordable, user-friendly application It prevents too much money out of your pocket
- By increasing productivity, you use as much as you need
- Prevents wasting your time by saving internet time
How To Pause Piso Wifi
Use the Pause Time feature in a few very simple ways.
- Connect to the Piso WiFi network and immediately open the Web browser you are using (Chrome, Mozilla, Opera, etc.)
- Type the IP address 10.0.0.1 in the URL Line and log in.
- Enter your username and password. Usually admin/user or admin/1234.
- Click on the option that says Pause Time.
- Use the ‘Pause’ button to stop your internet time from running and close it.
- To resume the internet, you can log in again and resume the time from where you left off.
Important and cautionary information about Pause Time
- Pause Time feature is only applicable to Piso Wi-Fi provider services. It does not work on other devices.
- There is a maximum pause time. A restart is required for this.
- Pause Time will be disabled in the event of a lost connection. Therefore, the feature is activated by logging in again.
Note To change the maximum pause time, try these methods:
If you are managing your own Piso Wi-Fi network, you can set your Pause Time duration or make it unlimited from the options below.
Piso WiFi ‘Maximum Pause Time’ Setting
If you are managing your own Piso WiFi network, you can increase the Piso Wifi Pause Time duration as follows:
1️⃣ Log in to 10.0.0.0.1 from your web browser.
2️⃣ Enter your username and password.
3️⃣ Access the “Pause Time” or “Session Settings” section.
4️⃣ From the “Maximum Pause Time” option, set the setting to 0 to make it unlimited or unlimited.
5️⃣ After making the settings, reset the modem again and wait for 2 minutes.
You need sufficient authorization to access these settings, if you cannot connect to the section above, it means you are not authorized.
What is Piso Wifi Working Logic
Piso Wifi works compatible with MikroTik, OpenWRT or specialized hotspot software. This system manages internet access with DHCP and Bandwidth Control and security mechanisms.
The working logic is as follows:
1️⃣After connecting to the Wifi network, the user is directed to a login page.
2️⃣The user then buys internet time either by inserting a coin or by paying with a QR code.
3️⃣The user is automatically provided with hotspot settings and a temporary IP address to access the internet.
4️⃣After the purchased time, the internet is automatically cut off. The user continues to use by paying again.
10.0.0.1 Piso wifi Login Problem
If you cannot connect to the Piso Wifi admin panel even though you have typed the username and password; there is a problem. There may be multiple reasons for this problem.
✓ The Piso Wifi device may have turned off.
✓ The IP address is incorrectly assigned.
✓ The browser cache is old and needs to be reset
✓ Check that the Wifi network is connected correctly.
✓ Reconnect to the Wifi network for a solution.
Try these addresses other than the ones above.
http://10.0.0.1/admin/
http://192.168.1.1/
Piso Wifi usernames and passwords may have changed. You can also try the following passwords.
Login to these addresses in addition to the above
Username: admin
Password: admin, 1234, password, try piso1234.