Month: March 2025

WPA2 vs WPA3

by

WPA2 vs WPA3, One of the most important topics for wireless internet users is security. Because we share all our important passwords and information with the Wi-Fi network we use. For this, router manufacturers have developed encryption protocols to protect against cyber threats. The most widely used encryption protocol today is WPA2. However, the need for advanced security has brought the WPA3 encryption protocol.

So what is the difference between WPA2 vs WPA3? Why should we use a router that supports WPA3?

WPA2 vs WPA3 : What are the Differences with WPA2?

WPA2 vs WPA3

WPA3 (Wi-Fi Protected Access 3) was introduced in 2018. Developed by the Wi-Fi Alliance , WPA3 is the most advanced security protocol available today. Developed due to the vulnerabilities of the WPA2 system, WPA3 offers a significant security system.

WPA3 offers strong encryption for both personal and corporate networks. It improves authentication and protection mechanisms and provides a secure internet experience.

What are WPA3 Features?

WPA3 uses a stronger security encryption protocol than WPA2. WPA2 vs WPA3;

1. Stronger Encryption (SAE – Simultaneous Authentication of Equals)

While WPA2 used the PSK (Pre-Shared Key) system, this system has been improved with SAE (Simultaneous Authentication of Equals) technology. This security system provides stronger encryption. It is a highly resistant system against people who use hacking methods to guess your password. Completely eliminates Brute-Force attacks.

 2. Open Wi-Fi Networks Security (OWE – Opportunistic Wireless Encryption)

Automatically activated on unencrypted Wireless networks, WPA3 maximizes data security by encrypting the network flow.

3. 192-bit Encryption with WPA3-Enterprise

192-bit encryption, your security level will be far superior to WPA2.

4. Protection Against Legacy Attacks (KRACK Security)

The KRACK vulnerability in the WPA2 system caused major security problems. This is one of the biggest reasons for the development of WPA3. Because of this vulnerability, millions of internet Wifi passwords were stolen.

The KRACK (Key Reinstallation Attack) vulnerability in WPA2 has been completely fixed with WPA3.

 5. Easy connection with IoT (Internet of Things)

WPA3 enables easy interconnection of devices using Internet of Things IoT technology. Supports Easy Connect, creating an exceptional system
It offers fast connectivity with features such as QR Code connection and NFC method.

WPA3 vs WPA2

We have provided a comparative table of WPA2 vs WPA3 internet security systems below. Check it out to get a better understanding of the differences.

Feature WPA2 WPA3
Encryption AES-CCMP (128-bit) GCMP-256 (256-bit)
Authentication PSK (Pre-Shared Key) SAE (Simultaneous Authentication of Equals)
Open Network Security None OWE (Opportunistic Wireless Encryption)
KRACK Attack Protection No Yes
IoT (Smart Device) Support Standard connection methods Wi-Fi Easy Connect (QR Code-based pairing)
Enterprise Security 128-bit AES encryption 192-bit AES encryption (WPA3-Enterprise)

Should I Use WPA3?

✅ Reasons to Choose WPA3

  • A more secure internet connection.
  • Extra security on public networks
  • More secure sharing and use on company networks
  • Easy access with Internet of Things (IoT) feature

❌ Situations where you cannot use WPA3:

✖ If your modem or router is not compatible with the new system, you will not be able to use it.
✖ So me older modems and routers do not support the WPA3 protocol.

Conclusion: Is WPA3 Worth Making the Switch?

WPA3 is much more secure than WPA2. It is definitely worth making the switch. Major improvements maximize your wireless network security. Stronger encryption, enhanced authentication, extra security measures in public networks, and many other high-level features.

If you are using a new generation device, we strongly recommend using WPA3. It is useful to check whether your WPA version is compatible with older devices.

Find Router IP Address

by

Find Router IP Address allows you to communicate with your modem and router network and manage your network.Usually, the private IP addresses 192.168.1.1 and 192.168.0.1 are used in the modem and router world.

To reach the default gateway of a router, you need to access the router interface by connecting to this IP address.

By finding the router IP address, you can edit your modem settings, perform port forwarding, and manage all connections on your network. You can also edit MAC and NAC settings and provide the necessary permissions for parental management.

Find the Router IP address by trying the following simple methods on infrastructures such as Windows, macOS, Android, IOS, Linux.

How to Find Router IP Address?

First, use a few simple methods to check whether your network is using standard IP addresses.

  1. Open your Web Browser (Chrome, Edge, Mozilla, etc.)
  2. Type the Router IP Address in the URL Address bar. It is usually 192.168.1.1 or 192.168.0.1.
  3. You will be asked to enter your username and password on the interface page. This password is usually admin/admin or admin/password. However, if not, please note the following note.

💡 Note: If you do not know the password, you can check the label on the back of your modem or contact your internet service provider. If you don’t have access to these, visit our Default Router Password List page, which you can access by selecting the brand of router you are using.

Windows Users

If you are using a Windows based computer, Find Router IP Address is quite simple. Find your modem or router IP address in just a few minutes. Here’s what you need to do for this:

➡️Click on Start on the left side of your computer.

➡️Type ‘cmd’ in the search field and open the terminal.

➡️On the black terminal screen that appears, type ‘ipconfig’ and press enter.

➡️In the options that appear, under the ‘Wireless Lan Adapter WiFi‘ section, Default Gateway is your default gateway.

Find Router IP Address

Linux Users

Find Router IP address on Linux-based operating systems is as simple as on Windows operating systems. Follow the instructions below for this.

➡️ Open the terminal. Use Ctrl + Alt + T to open it quickly.

Terminal line:

ip route | grep default

➡️ You will get the following result.

➡️For example : default via 192.168.0.1 dev wlan0 proto dhcp metric 400

Note: To find it with Netstat, which is another method, enter the following command in the Terminal line.

netstat -rn | grep ‘UG’

If Netstat is not installed on your computer, install it first with the following command and then enter the line above.

sudo apt install net-tools

MacOs Users

➡️ Open the terminal. Use Ctrl + Space + Write ‘Terminal’

netstat -nr | grep default

➡️After typing the above command, your IP address result will look like below.

default 192.168.1.1 UGSc en0

Android Users

There are 2 methods to find router IP address using the Android system:

1. Method

  • Open the settings of your phone.
  • Go to Wi-Fi and click on the Wi-Fi you are connected to.
  • Manage theconnection tab. In the tab that opens, find ‘advanced settings’ and then gateway. Ip addresses are usually taken as 192.168.1.1, 192.168.1.2, or 192.168.0.1.

2. Method

You can install 3rd party applications on your android based device and view your IP address through the application.

📌Fing – Network Tools

📌 WiFi Analyzer

📌 IP Tools: WiFi Analyzer

IOS USERS

 

  • Go to the settings of your phone.
  • Tap Wi-Fi at the top.
  • Select the Wi-Fi address you are using and at the bottom under.

Can the Router IP Address be Changed?

Yes, it is possible to change the IP address of a router you are using. Here is what you need to do for this;

  1. Access the router IP address and log in to the router interface.
  2. From here go to Network settings > LAN settings tab.
  3. Enter the IP address you want in this tab. For example ( 192.168.2.2)
  4. Save all settings and restart the router.

Recover Router Username and Password

by

It is possible to recover router username and password without resetting the modem. Sometimes, we forget the password we created, which can be frustrating. However, you can recover your router username and password using a few different methods.

Try Modem/Router Default Username and Password

 

First of all, it is the first thing you need to do according to the IP Address and Router brand model you are connected to.

If you know the model and IP address of your modem, review the default router password list below and enter the first password that appears.

You can get your default modem router and password from the list below. However, if there is no information requested here, visit our ‘DEFAULT ROUTER PASSWORD LIST‘ page.

Router Brand Login IP Username Password
TP-Link http://192.168.0.1 or http://192.168.1.1 admin admin
D-Link http://192.168.0.1 admin admin
Netgear http://192.168.0.1 admin password
Linksys http://192.168.1.1 admin admin
Huawei http://192.168.1.1 admin admin
Asus http://192.168.1.1 admin admin
2WIRE HTTP (none) Wireless
3Com http://192.168.1.1 admin admin
Belkin http://192.168.2.1 admin admin
Thomson http://192.168.1.254 admin user

 

Where is the default username and password located?

It is usually located on the back of your modem. However, some manufacturers may include it in the user manual. It often uses IP addresses 192.168.1.1 and 192.168.0.1.

The user of these addresses can be admin/password, while some router manufacturers may set a special password. Internet service providers identify these passwords with ‘their brand name’. For example : Starlink can define a special IP to a protocol of its own (such as admin/starlink or starlink/starlink).

Find Modem Password without Reset

If you ask if it is possible to find a password for your modem or router without pressing the reset button on the back, yes, it is. However, this requires advanced technical knowledge. A Linux-based program provides this, but it is a very long-term job.

Therefore; pressing and holding for 30-40 seconds on the back of your modem will allow you to reach the result faster. We have shared a picture of how to do it in the picture below.

Recover Password Cisco Router

Cisco, the big router brand used in almost every country, defines the modem user and password differently like other companies. With this definition, it sometimes causes forgetting the password. However, we wanted to give the default Cisco Router Password for you.

 Recover Router Username and Password

Cisco Router IP Adresleri :

  • 192.168.1.1
  • 192.168.0.1
  • 192.168.1.254

Default Cisco Router Password : 

New Models : Username : Admin  Password : cisco

Old Models : Username: cisco Password: cisco

Linksys Router Recover Rassword

Forgetting the password for your Linksys router can be really frustrating. In this case, there are a few simple ways to recover your password or reset your router.

Linksys : Uses ip addresses 192.168.1.1 and 192.168.0.1

The simple login addresses of these addresses are as follows:

Username: admin Password: admin

Username: admin Password: password

If none of the above works, press the ‘reset‘ button on the back of your modem for 10 seconds. Then try logging in again.

LPB Piso WiFi

by

LPB Piso Wifi is a self-running internet sharing system popular in the Philippines. Piso stands for 1 Peso in the Philippines and is used as an abbreviation. Users who want Wi-Fi access benefit from LPB Piso for a set fee.

Piso Wifi: means internet sharing at a low cost. By purchasing this device, businesses generate revenue for themselves. LPB Piso WiFi is available everywhere, from buses to markets.

   

How to Insert Piso ( Money) LPB Piso Wifi?

LPB Piso WiFi

After finding the LPB Piso Wifi machine, follow these steps:

✅First connect to the WiFi network. Usually it is (PisoWifi_Zone or LPB_PisoWifi).

✅The login page automatically appears after joining the network. However, sometimes it does not happen automatically, type the address 10.0.0.0.1 manually in the address line of your browser.

✅On the interface page, click on ‘Instert Money’ and insert a coin into the machine.

✅After the money has been withdrawn by the device, it will offer you the time option.

✓ You are now connected to the hotspot device, enjoy.

LPB Piso WiFi Pause Time

1. Connect to the LPB Piso WiFi network. This network can usually be (LPB_PisoWiFi).
2. Then type 10.0.0.1 in the URL line of your web browser and connect to the Piso Wifi Pause Time page.
3. In the interface options, click on the red option called ‘Pause Time‘.
4. Your time will now stop and will not expire until you come back and activate it.

Note: There are 2 options in the system. When you connect to the internet, the Pause Time feature is automatically disabled. Another option is that LBP Pause Time is automatically activated when the connection is lost. We recommend that you activate both of these options in 10.0.0.0.1 settings.

LPB Piso WiFi Advantages

Additional Income: for small business owners, subscribing to the LPB Piso WiFi system provides low-cost internet access, which can generate huge profits. Thus, their sales potential is great in densely populated areas.
User Friendly and Automatic working principle: LPB Piso Wifi automatically assigns networks, so the whole system works by itself. The user can quickly access cheap internet by simply paying for Piso.
Low infrastructure cost: since the infrastructure cost is low, a very fast installation takes place… Almost all business in the Philippines.

LPB piso wifi admin

In the Piso Wifi system, you cannot log in without the admin user and name password. There is a default username and password for this. With this data, it is possible to enter the system and extend the pause time and minutes.

​What is Piso WiFi Password?

It often uses the password admin/admin or admin/1234. The administrator changes this password to organize his/her system and can tell you this at the point of sale.

LPB piso wifi Problems and Solutions

I don’t see the Piso Wifi pause option, what is the reason for this?
▶️ Usually Piso Wifi business owners can disable this feature. If you do not see the ‘Pause Time’ option on the 10.0.0.0.1 page, contact your place of purchase for details.

My wifi remaining time was reset even though I paused it, what should I do?
▶️ Sometimes you connect to IP address 10.0.0.0.1 and activate the Pause Time feature, but when you return, you find that all your time is gone. To solve this problem, clear your browser cache. If the problem persists, log out and try with a different browser.

The 10.0.0.1 page won’t open, what should I do?
▶️If this IP address page does not open, either you are not connected to the Wi-Fi network or there is a problem with the Piso Wifi deployment.
For this, go to network connections and check if you are connected.
▶️If you are connected, type ‘ipconfig‘ from the Windows Terminal section and check if Piso Wifi is connected with 10.0.0.1. If your IP address is correct, you should restart the system.

Piso Wifi Pause Time

by

Piso Wifi Pause Time is a pay-as-you-go internet service that is widely used in the Philippine government. Users purchase the Wi-Fi service for a fee and use the internet service for a set period of time. Piso Wifi is a useful feature that allows users to pause time so that they do not eat up their internet time.

 

10.0.0.1 Piso Wifi Pause Time

Piso Wifi Pause Time allows users to temporarily pause their internet time. For example; If a 30-minute purchase has been made and a 10-minute break is desired, 20 minutes can be stopped thanks to the Pause Time feature. Thus, when you come back, you will start from your 20 minutes.

    • Piso Wifi Pause Time is an affordable, user-friendly application It prevents too much money out of your pocket
    • By increasing productivity, you use as much as you need
    • Prevents wasting your time by saving internet time

How To Pause Piso Wifi

Piso Wifi Pause Time

Use the Pause Time feature in a few very simple ways.

  1. Connect to the Piso WiFi network and immediately open the Web browser you are using (Chrome, Mozilla, Opera, etc.)
  2. Type the IP address 10.0.0.1 in the URL Line and log in.
  3. Enter your username and password. Usually admin/user or admin/1234.
  4. Click on the option that says Pause Time.
  5. Use the ‘Pause’ button to stop your internet time from running and close it.
  6. To resume the internet, you can log in again and resume the time from where you left off.

 

Important and cautionary information about Pause Time

  •  Pause Time feature is only applicable to Piso Wi-Fi provider services. It does not work on other devices.
  •  There is a maximum pause time. A restart is required for this.
  •  Pause Time will be disabled in the event of a lost connection. Therefore, the feature is activated by logging in again.

Note To change the maximum pause time, try these methods:

If you are managing your own Piso Wi-Fi network, you can set your Pause Time duration or make it unlimited from the options below.

Piso WiFi ‘Maximum Pause Time’ Setting

If you are managing your own Piso WiFi network, you can increase the Piso Wifi Pause Time duration as follows:

1️⃣ Log in to 10.0.0.0.1 from your web browser.
2️⃣ Enter your username and password.
3️⃣ Access the “Pause Time” or “Session Settings” section.
4️⃣ From the “Maximum Pause Time” option, set the setting to 0 to make it unlimited or unlimited.
5️⃣ After making the settings, reset the modem again and wait for 2 minutes.

You need sufficient authorization to access these settings, if you cannot connect to the section above, it means you are not authorized.

What is Piso Wifi Working Logic

Piso Wifi works compatible with MikroTik, OpenWRT or specialized hotspot software. This system manages internet access with DHCP and Bandwidth Control and security mechanisms.
The working logic is as follows:

1️⃣After connecting to the Wifi network, the user is directed to a login page.
2️⃣The user then buys internet time either by inserting a coin or by paying with a QR code.
3️⃣The user is automatically provided with hotspot settings and a temporary IP address to access the internet.
4️⃣After the purchased time, the internet is automatically cut off. The user continues to use by paying again.

10.0.0.1 Piso wifi Login Problem

If you cannot connect to the Piso Wifi admin panel even though you have typed the username and password; there is a problem. There may be multiple reasons for this problem.

✓ The Piso Wifi device may have turned off.
✓ The IP address is incorrectly assigned.
✓ The browser cache is old and needs to be reset
✓ Check that the Wifi network is connected correctly.
✓ Reconnect to the Wifi network for a solution.

Try these addresses other than the ones above.

http://10.0.0.1/admin/

http://192.168.1.1/

http://192.168.0.1/

Piso Wifi usernames and passwords may have changed. You can also try the following passwords.

Login to these addresses in addition to the above

Username: admin

Password: admin, 1234, password, try piso1234.

192.168.1.101

by

IP addresses are a big part of the networking and internet world. The Private IP Address 192.168.1.101 is usually assigned for use on local networks. Read more for detailed information on how to login to this address.

 

How to Login 192.168.1.101?

It is possible for any router model to use the address we introduced as the default gateway. If your router or modem uses the 192.168.1.101 gateway, follow the steps below to log in to the admin panel:

1. Open your web browser (you can use any Chrome, Firefox, Edge, etc.)
2. Type http://192.168.1.101 in the address line and press enter.
3. Enter your modem username and password. Usually by default (Username: Admin / Password: Admin or Username: admin / password: 1234).

If you have done all this and still cannot access your default modem router settings, your IP address is not correct. In such cases, we recommend you to try 192.168.1.1 or 192.168.2.1.

Which modems and routers use the address 192.168.1.101?

 

192.168.1.101

The IP address 192.168.1.101 cannot be used as the default gateway address. It is assigned by a DHCP server to devices on a local network or can be manually configured as a static IP address. Although it is a local network, some major router manufacturers can directly define 192.168.1.101 as a management address.

Which manufacturers prefer 192.168.1.101?

World-renowned router manufacturers such as Netgear, TP-Link, Asus, D-Link, Linksys, Huawei and ZTE prefer this IP address. Although these companies generally prefer 192.168.1.1 or 192.168.0.1, in some cases they also assign the IP address 192.168.1.101. The main reasons for this are;

✓ Static IP configuration: for example, a static IP is assigned for a printer, server or second access point.
✓ Dual IP assignment feature of the router: Some router models allow multiple IP configurations.
✓ Internet service provider (ISP) : Modems or routers designed for Internet service providers may prefer Ip Adress.

Brand Default IP Address Default Username Default Password
TP-Link 192.168.1.1 / 192.168.0.1 admin admin
Netgear 192.168.1.1 / 192.168.0.1 admin password
Asus 192.168.1.1 / 192.168.50.1 admin admin
Linksys 192.168.1.1 / 192.168.0.1 admin admin
D-Link 192.168.1.1 / 192.168.0.1 admin admin
Huawei 192.168.1.1 / 192.168.100.1 admin admin / root
ZTE 192.168.1.1 / 192.168.0.1 admin admin / root
MikroTik 192.168.88.1 admin (empty)
Ubiquiti 192.168.1.1 / 192.168.1.20 ubnt ubnt

Note: If admin panel is not the login page of your modem, you can try the IP addresses above.

I cannot connect to 192.168.1.101 IP Address, how to login?

If you have not been successful in accessing Admin Login, you may be doing something wrong. In such cases, try our suggestions below:

✅ Try restarting your modem. Restarting the modem will resolve IP address conflicts and reset the modem to its default settings.

✅Check your network connection. If you are connected to 192.168.1.101 via Wi-Fi, try connecting via an Ethernet cable. We strongly recommend you to try it for a definitive result.

✅ Find out the IP address using the terminal on your computer.
➡️ Windows users Start → Run → CMD → ‘ipconfig’ to see the default gateway
➡️ MAC and Linux users can access details using the commands: ip router | grep default or ifconfig  

✅ Renew your IP address using CMD Commands
➡️ Windows users, the IP address can be renewed using the commands ‘ipconfig /release‘ followed by ‘ipconfig /renew’. These commands allow you to get a new IP.

192.168.1.101 Technical Specifications

IP Address Type        →  Private IP Adress

IP Class                       →  Class C

Subnet                        →   255.255.255.255.0 (Default)

CIDR Range                →  192.168.1.0/2

Private IP Block          →  192.168.0.0 – 192.168.255.25

Assignment Method  →   DHCP or Static IP

Area of Use                →    Local Area Network (LAN)

As a result, it is a specially used IPv4 address. It is assigned only for local networks. Many routers do not define this address by default but can assign it to the desired device by implementing the DHCP protocol. Network administrators are extremely important for important devices such as printers, security cameras, etc.

Default Router Password List

by

Find the Default Password List page for your modem below. All you need to do is enter the name of the correct device and add the information given below to your URL line to create your edit.

DEFAULT MODEM/ROUTER PASSWORD LIST

Router Brand Login IP Username Password
TP-Link http://192.168.0.1 or http://192.168.1.1 admin admin
D-Link http://192.168.0.1 admin admin
Netgear http://192.168.0.1 admin password
Linksys http://192.168.1.1 admin admin
Huawei http://192.168.1.1 admin admin
Asus http://192.168.1.1 admin admin
2WIRE HTTP (none) Wireless
3Com http://192.168.1.1 admin admin
Belkin http://192.168.2.1 admin admin
Thomson http://192.168.1.254 admin user

 

The history of the Internet dates back to the 1960s. The first step of the internet, which appeared as ARPANET, allowed us to make transactions that changed our whole world. Today, many people cannot do without the internet.

Thanks to the internet, which is now everywhere in our lives, we organize both our work and our daily lives. With the birth of the internet, modems have gained a lot of importance. They were divided into important sections such as ADSL, VDSL and Fiber. The internet, which was first received over telephone cables, then returned to copper cables and now Fiber Optic glass cables. For the internet world reaching 10 Gbit speeds, modems have gained great importance.

Since modems or routers are significantly more, it is not easy to memorize all of their passwords. That is why some companies share them as default router password list. In this topic, we will share the generally accepted modem/router passwords for you. Especially for beginners, you will be able to access your modem interface and make detailed settings with this data that will allow you to manage easily.

🔑 FREQUENTLY ASKED QUESTIONS(FAQs)

➡️I can’t find my modem in the list above?
✔ We have another resource in cases like this. Visit Find Router IP Adress for details.
➡️I entered my modem username and password but I can’t log in?
✔The main reason for this problem is that you entered your password incorrectly. First of all, if you have entered your password correctly but the problem persists, press the ‘reset’ button on the back of your modem for 10 seconds and re-enter the username and password given to you in the list above.

jiofi.local.html

by

jiofi.local.html is a URL address used to access the web-based admin panel for JioFi portable Wi-FI routers (Mi-Fi). This technology, created by Reliance Jio, is a 4G Modem/Router device that goes by the name JioFi.

 

jiofi.local.html Login

What is jiofi.local.html?

This specially designed URL allows you to configure the settings of your JioFi device. Through jiofi.local.html, which gives you access to the admin panel, you can :

▶️ Change your Wi-Fi username (SSID) and password,
▶️ Display all connected devices,
▶️Allows you to manage your devices
▶️Changes network security settings
▶️JioFi You can check your device’s battery, network and firmware settings.
▶️4G You can connect to the internet at LTE speed and share.
▶️You can connect your devices that cannot access cellular to the internet thanks to JioFi.

jiofi.local.html

How to Use jiofi.local.html?

  1. Turn on your device given to you by JioFi company via the ‘Power‘ button.
  2. Join the JioFi network to connect via phone, tablet or computer.
  3. Click jiofi.local.html to log in to the admin panel or use the shorter path 192.168.225.1 .
  4. After logging in, you can change the features listed at the top of this article.
  5. After logging into the admin panel, you can enter the username and password of the JioFi device.( By default, username: Admin / password: Admin ).
  6. Through this access panel, it is possible to ensure the best operation of the JioFi device and increase its security.

What Should I Do If JioFi.local.html Does Not Open?

If you cannot connect to jiofi.local.html even though you fulfill all the necessary conditions , try these steps:

✅ Make sure you are connecting to the correct network address (usually the one on the bottom of your router, the one you want to connect to the wireless network.

✅ Log in using a different web browser. For example Chrome, Firefox, Safari, Edge, Opera, etc.

✅Do not type jiofi.local.html in the URL line but 192.168.225.1. This method is often used.

✅Go and clear the cache settings of your web browser and try the above procedure again.

Try not resetting the JioFi device to factory settings. Press and hold the in-built ‘reset’ button on the back of your router for 10 seconds and reset it to factory default.

Advantages of Using JioFi

⭐Easy transportation: Small and lightweight, the JioFi device allows you to take it wherever possible.
⭐Multi-Device Connection Support: It can provide internet to 10 to 32 devices in the same environment.
⭐ Battery Capacity: Provides 5 to 8 hours of uninterrupted internet access with intensive use.
⭐High Internet Speed: 4G LTE protocol provides high-speed internet connection.

jiofi local html forgot password

It is natural to forget your password after you have installed and used your device. In such cases, you do not need to contact your internet service provider in any way. Because the ISPs will also explain the method below to you over the phone and ask you to do it. Follow the steps below without panicking:

✅From a tablet, computer or phone connected to your JioFi device, type jiofi.local.html or 192.168.225.1 in the URL line of your web browser and enter it. After connection, find the ‘Wi-fi Configuration’ tab. Here you can fill in the SSID and Password options as you wish.

✅Another option is the ‘reset button’ on the back of the device. You should press and hold this button with a pin for about 10 seconds. This button will restore all the settings of the router as they were processed at the factory. Thus, the username and password will be (admin/admin) and the password for the Wi-Fi connection will be the information on the back.

Differences between JioFi.local.html and Other Devices

Feature JioFi (Jio Modems) Other MiFi Modems (Huawei, TP-Link, etc.)
Supported Networks 4G LTE only (Jio VoLTE supported) Models supporting 2G/3G/4G are available
Web Interface http://jiofi.local.html and 192.168.225.1 uses 192.168.1.1 or other support IP Adress
Battery Life 5-8 hours (varies depending on various JioFi models) It can be longer or shorter depending on the modem.
Operator Lock Supports Jio SIM Card Only. Most models work with any SIM card
Number of Connected Devices Supports from 10 to 32 devices Typically supports up to 10-15 devices
VoLTE Support VoLTE calls can be made with Jio4GVoice Volte support is often not available
Firewall Settings Uses WPA2, MAC filtering, advanced encryption WPA/WPA2 encryption is supported
Software Updates Jio INC. sends regular and continuous updates. It depends entirely on the manufacturer.

 

Frequently Asked Questions (FAQ)

Is it possible to use my JioFi device without a SIM card
– No, you must have a Reliance Jio branded sim card for your device to be active.
How can I reset my JioFi device to factory settings?
– When you press and hold the ‘reset button’ on the back of the router for about 10 seconds, all lights will flash and your device will be reset.
I forgot my JioFi Wi-Fi password, how can I reset it?
-We explained this process in more detail above, but you can access the Wi-Fi settings by connecting to the JioFi.local.html panel or reset your device to factory settings..
What is the original website of this device?
-You can visit the device’s original website for more information or to purchase it.

192.168.1..15

by

192.168.1.15 is treated as a private IP address. It cannot be used to access the Internet directly and can only be used for the local host (local network).

 

192.168.1.15 Login

What Does the ip address 192.168 1.15 29 Represent​ (192.168.1.15/29)

Parsing 192.168.1.15/29

In the following article, we will go into detail on this topic. We have added different information especially for the sake of understanding. For example, we have only shared the details of 192.168.1.15/29, which is a subnet of 192.168.1.15.

  1. 168.1.15 → This is an IP address within the private network 192.168.1.0/24.
  2. /29 (Subnet Mask: 255.255.255.255.248) → Defines a subnet with a total of 8 IP addresses (6 available for hosts and devices).

Subnet Details for 192.168.1.15/29

  • Network Address: 192.168.1.8
  • Available Host IPs: 192.168.1.9 to 192.168.1.14
  • Broadcast Address: 192.168.1.15
  • Subnet Mask: 255.255.255.248
  • Total number of IPs: 8 usable IP addresses (2 for network and broadcast, 6 for usable devices)

What Does It Represent?

  • Small Subnet on a Private Network: Divides the network on any local host into smaller segments.
  • LAN Configurations : Preferred in modems or routers to ensure LAN security.
  • Limited to 6 Devices: If assigned to a network, it allows only 6 available IPs for devices such as computers, printers or servers.

192.168.1.15 is limited to 6 available IPs. So in other words, 6 devices are accessible. When an available network is assigned (computer, printer, server, etc.) it will be possible to access 6 IPs.

To put it briefly, 192.168.1.15/29 is the broadcast address of the 192.168.1.8/29 subnet. This network address is used to send data to all devices.

What are the available ports for 192.168.1.15?

A network administrator assigns the IP address 192.168.1.15 to an independent local area network. This address is a private IP address. However, in some cases, special ports can be specified for the IP address.

For example, if you are a Windows user :

192.168.1.15 should use the ‘nmap‘ or ‘netstat’ commands from another computer connected to the network. This will give you a chance to see the port of your network.

Nmap for Linux/Windows or Mac users
Ports analyzed using the Nmap tool. With this command, you can see which port is open and which is inactive.

'nmap 192.168.1.15'

We have shown the commonly used ports of the Internet world in a table below. All details about this subject are in the table below.

How to Assign 192.168.1.15?

  Automatically assigns a Dynamic (DHCP) router.

  This static IP address is assigned to specific devices

  • The user can manually assign it to a computer and printer.
  • User can assign 192.168.1.15 both automatically and manually. This provides great convenience in terms of use.

Other private IP Addressesused

  • 10.0.0.0.0 – 10.255.255.255.255 (Uses for companies with large corporate networks)
  • 172.16.0.0 – 172.31.255.255 (Medium-sized networks use)

Summary

  • 192.168.1.15, It can belong to a PC, printer or server.
  • It is not possible to access via the Internet
  • Check which device has this IP by using network tools such asarp, ping or nmap.

The address 192.168.1.15 can belong to a computer, printer, server or any other needed device.

There is no access over the Internet. Does not support port forwarding. Security is at the forefront and allows convenient use of the local server.

Using network tools like ping, arp, nmap, etc., you can check and manage device IPs.

 

IPv4 vs. IPv6: The Evolution of Internet Connectivity

by

IPv4 vs. IPv6 : Ip (Network) Protocols are not only unique to modems or routers. Through these protocols, we can provide network communication on the internet. Through general protocols we can experience different features.

IPv4 vs IPv6 – IP (Network) Protocols  

✔️ IPv4 (Internet Protocol version 4) ➡️ 32 Bit Addressing

✔️ IPv6 (Internet Protocol version 6) ➡️ 128 Bit Addressing

In the world of Internet and network communication, we come across 2 types of network protocols. These are IPv4 (Internet Protocol Version 4) and Ipv6 (Internet Protocol Version 6). Ipv4, one of these protocols, performs 32-bit addressing. It is ranked as the choice of especially large modem and router companies all over the world. IPv6 Protocol will offer 128bit addressing. Developed as a competitor to IPv4, the IPv6 protocol provides access to a more secure internet.

What are the Network Protocols Commonly Used in Modems and Routers?

▶️PPP (Point-to-Point Protocol) -> The type used for many DSL-VDSL connections and Dial-up connections.

▶️PPPoE (Point-to-Point Protocol over Ethernet)-> A protocol that provides authentication through the ISP. Generally used for DSLs. One of the most common protocols.

▶️DHCP (Dynamic Host Configuration Protocol)-> Used to manage the IP address assigned by modems. It allows modems to manage IP address assignment.

▶️NAT (Network Address Translation) -> It is a protocol that manages to deliver the devices in your local network to the internet with a single public IP address.

▶️DNS (Domain Name System)-> It connects your website domain name to its IP address through DNS management. Thus, the website connects to the internet with its domain name, not its IP address.

▶️TCP (Transmission Control Protocol -> A protocol used for secure data transfer. It is frequently used in modems.

▶️UDP (User Datagram Protocol)-> Used for fast but unreliable data transmission. It provides fast data transmission in many respects, but on the other hand, it provides a data transmission that is uneasy about its security. It may make you hesitate to choose it.

▶️ICMP (Internet Control Message Protocol)-> A protocol used for diagnostic purposes on the network. For example, it is used for ‘ping’ diagnostics.

▶️SNMP (Simple Network Management Protocol)-> Used to manage devices connected to your network. Thanks to its use, it implements a different system.

What is the difference : IPv4 vs IPv6

The two most basic IP protocols make our network management easier. The IPv4 protocol will provide an estimated 4.3 billion unique IP addresses in 2³². Thus, the problem of address scarcity is eliminated. However, as the world of the Internet grows dramatically every day, IPv4 has become inadequate and a different technology has been sought to support it.

The IPv6 protocol, which emerged in the face of the inadequacy of IPv4, will provide 340 trillion unique addresses with another estimated rate of 2¹²⁸. Thus, one of the biggest problems, address scarcity, was eliminated. More security is provided, and the automatic IP feature simplifies all operations. The management of very large networks has become significantly easier.

Modems and routers used today provide both IPv4 and IPv6 protocol support. Users have not fully migrated to IPv6. The proportional IPv6 usage rate of the world is low. However, this rate is increasing day by day thanks to new routers and modems. At the same time, internet infrastructure providers support this process and develop their infrastructure accordingly. The competition between IPv4 vs IPv6 is increasing every day.

Detailed information about IPv4 (Internet Protocol Version 4)

💡 General information

  • Introduced and introduced in 1981.
  • Produces 32-bit addressing.
  • It has stood the test of time, providingan estimated 4.3 billion (2³²) unique IP addresses.
  • It provides presentation using dotted-decimal notation. Take for example 192.168.1.1 or 192.168.0.1.
  • It has been supported by modem and router manufacturers for many years and is still in use.

🛑Disadvantages of IPv4

  • IPv4 addresses are exhausted, so address sharing is done using NAT (Network Address Translation). IPv4 has now exhausted addresses with the increase in internet usage around the world. Therefore, the use of special NAT (Network Address Translation) has been switched and thus support has been obtained from the address sharing option.
  • It is insufficient in terms of security. It is recommended to use IPSec (secure IP communication).
  • Manual IP assignment is possible. However, it is quite difficult to do this manually. Therefore, it is seen as weak in terms of management.

✅ Advantages of IPv4

  • It is the most widely used IP protocol worldwide. It is the most widely used IP protocol in the world.
  • Almost all devices support IPv4 as a network protocol.
  • Internet service providers (ISPs) actively use IPv4 for the necessity of the Internet world. It is still actively used even though the transition process is ongoing.

Detailed information about IPv6 (Internet Protocol Version 6)

💡 General Information

  • Developed in 1998, but it was only widely used in the early 2000s. Many internet service providers started using this protocol in the 2000s. However, it was first developed in 1998 and made available to the whole world.
  • It has a 128-bit addressing capability.
  • It uses 2¹²⁸, in other words 340 trillion unique IPs.
  • It distinguishes itself by using hexadecimal notation. Example : 2003:0bo8:95a4:0000:0000:0000:9c2a:0944:9224
  • Its automatic IP assignment feature differentiates its addressing capability.

✅ Advantages of IPv6

  • It defines unlimited IP addresses and thus eliminates problems such as running out of addresses.
  • Provides higher security; IPSec (secure communication) is mandatory. It provides a high level of security. IPSec is not optional but mandatory in this protocol. Thus, it provides high security thanks to its high bit rate.
  • It provides fast and efficient management of internet traffic. It increases efficiency thanks to its routing structure.
  • It does not need DHCP thanks to automatic addressing (SLAAC).
  • It hasa more efficient routing structure, so internet traffic is managed faster and more efficiently.
  • Provides automatic addressing (SLAAC) without the need for DHCP.

🛑 Disadvantages of IPv6

  • Not as common as IPv4, so some older devices may not support IPv6. Older devices do not support IPv6. This is a big obstacle to its widespread use. However, ISPs are introducing IPv6 supported modems for this situation and directing users.
  • The transition process may require large costs. Therefore, it will take quite a long time for the transition.
  • IPv6 has a long address structure. Reading and memorizing is difficult for us humans.

Compafrison table about IPv4 vs IPv6

IPv4 vs. IPv6: The Evolution of Internet Connectivity

Transition to IPv6 in the FUTURE

In the future, the internet will completely switch to IPv6. This will make the internet world both more secure and faster.

Mobile devices have accelerated to support 5G technology. This technological attack has accelerated the transition to the IPv6 process.

At the same time, cloud computing and datacenters have greatly increased their capacity, accelerating the transition process.

Government policies have also made the transition to IPv6 mandatory. Although the transition process is painful, we are sure that it will put the internet process on a very different path.